|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number : ENN7219A CPH3121 / CPH3221 CPH3121 / CPH3221 Applications * PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features * * * * * * Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). High allowable power dissipation. Specifications ( ) : CPH3121 Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--)15 (--12)15 (--)5 (--)3 (--)5 (--)600 0.9 150 --55 to +150 Unit V V V A A mA W C C Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)12V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)500mA VCE=(--)2V, IC=(-)500mA VCB=(--)10V, f=1MHz 200 (380)350 (40)23 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF Unit A A Marking : CPH3121 : AS, CPH3221 : CS Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N1504 TS IM TB-00000309 / 80902 TS IM TA-100097, 3618 No.7219-1/5 CPH3121 / CPH3221 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1.5A, IB=(--)30mA IC=(--)1.5A, IB=(--)30mA IC=(--)10A, IE=0 IC=(--)1mA, RBE= IE=(-)10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (-)15 (-12)15 (--)5 (30)30 (90)210 (14)11 Ratings min typ (--)0.85 max (--)1.2 (-110)115 (--165)175 Unit mV V V V V ns ns ns Package Dimensions unit : mm 2150A 2.9 0.4 3 Switching Time Test Circuit 0.6 0.2 0.15 PW=20s D.C.1% INPUT IB1 OUTPUT IB2 VR 50 RB=1k 0.05 RL 1.6 2.8 1 1.9 2 + 220F + 470F VCC=5V 0.6 0.7 0.9 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 0.2 VBE= --5V IC=20IB1= --20IB2=1.5A For PNP, the polarity is reversed. --200 --180 IC -- VCE A --0.7m --0.8m A 5.0 IC -- VCE 40m A 25m -- 0.6mA --0.5mA Collector Current, IC -- A A CPH3221 4.5 4.0 20mA Collector Current, IC -- mA --160 --140 --120 --100 --80 --60 --40 --20 0 0 15mA 3.5 3.0 --0.4mA --0.3mA --0.2mA 10mA 2.5 2.0 1.5 1.0 0.5 5mA 2mA 1mA IB=0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 --0.1mA CPH3121 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 IB=0 --4.5 --5.0 IT04582 0 Collector-to-Emitter Voltage, VCE -- V --2.0 --1.8 --1.6 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V 5.0 IT04583 IC -- VCE CPH3121 --14m A IC -- VCE mA 60 40m A A --12m --10mA --8mA Collector Current, IC -- A 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 CPH3221 25mA Collector Current, IC -- A 20mA A --16m --6mA 15mA 10mA --4mA --2mA 5mA IB=0 IB=0 --0.9 --1.0 IT04584 2mA 1mA 0.8 0.9 1.0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Collector-to-Emitter Voltage, VCE -- V Collector-to-Emitter Voltage, VCE -- V IT04585 No.7219-2/5 CPH3121 / CPH3221 --3.0 IC -- VBE CPH3121 VCE= --2V Collector Current, IC -- A 3.0 IC -- VBE CPH3221 VCE=2V --2.5 2.5 Collector Current, IC -- A --2.0 2.0 --1.5 1.5 Ta=75 C 25C --25C --1.0 1.0 --0.5 0.5 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT04586 0 0 0.2 0.4 0.6 0.8 1.0 1.2 IT04587 Base-to-Emitter Voltage, VBE -- V 1000 7 5 Base-to-Emitter Voltage, VBE -- V 1000 hFE -- IC CPH3121 VCE= --2V Ta=75C DC Current Gain, hFE hFE -- IC CPH3221 VCE=2V 7 5 DC Current Gain, hFE 3 2 25C 3 --25C Ta=75C 25C --25C 2 100 7 5 --0.01 100 7 5 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 Collector Current, IC -- A 1000 7 --10 IT04588 2 3 5 7 0.1 2 3 Ta=75 C 5 25C --25C 7 1.0 2 3 5 Collector Current, IC -- A 1000 7 10 IT04589 f T -- IC Gain-Bandwidth Product, f T -- MHz f T -- IC CPH3221 VCE=2V Gain-Bandwidth Product, f T -- MHz 7 5 CPH3121 VCE= --2V 7 5 3 2 3 2 100 7 5 3 --0.01 100 7 5 3 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 100 IT04590 100 Collector Current, IC -- A IT04591 Cob -- VCB Cob -- VCB CPH3221 f=1MHz CPH3121 f=1MHz Output Capacitance, Cob -- pF 7 Output Capacitance, Cob -- pF 2 3 5 7 2 3 7 5 5 3 2 3 2 --1.0 10 --10 1.0 2 3 5 7 10 2 3 5 Collector-to-Base Voltage, VCB -- V IT04592 Collector-to-Base Voltage, VCB -- V 7 100 IT04593 No.7219-3/5 CPH3121 / CPH3221 5 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3121 IC / IB=20 5 3 2 VCE(sat) -- IC CPH3221 IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 --100 7 5 3 2 100 7 5 3 2 = Ta C 75 --2 C 5 C 25 C 25 C 5 =7 Ta C 5 --2 --10 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT04594 10 7 5 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 5 Collector Current, IC -- A 5 5 7 10 IT04595 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV CPH3121 IC / IB=50 VCE(sat) -- IC CPH3221 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 2 3 2 100 7 5 3 2 7 5 3 2 =7 Ta C 5 --2 C 5 2 C 5 Ta 5 =75 C C 2 3 5 7 0.1 2 3 5 7 1.0 --100 25 C --10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 3 5 7 --10 IT04596 10 0.01 --2 2 3 VBE(sat) -- IC Collector Current, IC -- A 3 5 7 10 IT04597 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 CPH3121 IC / IB=50 2 CPH3221 IC / IB=50 --1.0 7 25C Ta= --25C 1.0 7 25C Ta= --25C 75C 5 75C 5 3 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 5 7 --10 IT04598 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 ASO Collector Current, IC -- A 10 7 5 5 7 10 IT04599 ASO ICP= --5A IC= --3A DC 1m s Collector Current, IC -- A Collector Current, IC -- A <100s 50 0 s 10 m s 3 2 1.0 7 5 3 2 0.1 7 5 3 2 ICP=5A IC=3A DC <100s 1m 50 s 0 10 s 10 op era 0m n 10 op era s 0m n m s s tio tio --0.01 --0.1 CPH3121 Ta=25C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 2 3 5 7 --1.0 2 3 5 Collector-to-Emitter Voltage, VCE 7 --10 2 -- V IT04600 0.01 0.1 CPH3221 Ta=25C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 2 3 5 7 1.0 2 3 5 7 Collector-to-Emitter Voltage, VCE -- V 2 10 IT04601 No.7219-4/5 CPH3121 / CPH3221 1.0 0.9 PC -- Ta CPH3121 / CPH3221 Collector Dissipation, PC -- W M 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 20 40 ou nt ed on ac er am ic bo ar d (6 00 m m2 ! 0. 8m m ) 60 80 100 120 140 160 Ambient Temperature, Ta -- C IT04602 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2004. Specifications and information herein are subject to change without notice. PS No.7219-5/5 |
Price & Availability of CPH3121 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |